Ricoh M281 Series - Page 870

Error Codes
D255/D256 FAX OPTION 36 SM
Code Meaning Suggested Cause/Action
14-08
Data Send to SMTP Server
Failed (5XX)
 Failed to access the SMTP server because
the transmission failed.
 SMTP server operating incorrectly.
 Destination folder setting incorrect.
 Direct SMTP sending not operating
correctly.
 Software application error.
14-09
Authorization Failed for
Sending to SMTP Server
 POP-Before-SMTP or SMTP authorization
failed.
 Incorrect setting for file transfer
14-10 Addresses Exceeded
 Number of broadcast addresses exceeded
the limit for the SMTP server.
14-11 Buffer Full
 The send buffer is full so the transmission
could not be completed. Buffer is full due
to using Scan-to-Email while the buffer is
being used send mail at the same time.
14-12 Data Size Too Large
 Transmission was cancelled because the
detected size of the file was too large.
14-13 Send Cancelled
 Processing is interrupted because the user
pressed [Stop].
14-14 Security Locked File Error
 Update the software because of the
defective software.
14-15 Mail Data Error
 The transmitting a mail is interrupted via
DCS due to the incorrect data.
 Update the software because of the
defective software.
14-16
Maximum Division Number
Error
 When a mail is divided for the mail
transmission and the division number of a
mail are more than the specified number,
the mail transmission is interrupted.
 Update the software because of the
defective software.