Bit Switches - 2
D255/D256 FAX OPTION 84 SM
1 Subject corresponding to mail post database
0: Standard subject
1: Mail post database subject
The standard subject is replaced by the mail post database subject in the
following three cases:
1) When the service technician sets the service (software) switch.
2) When memory sending or delivery specified by F code is applied by the SMTP
server
3) With relay broadcasting (1st stage without the Schmidt 4 function).
This switch does not apply for condition 3) when the RX system is set up
for memory sending, delivery by F-code, sending with SMTP RX and
when operators are using FOL (to prevent problems when receiving
transmissions).
2-7 Not Used
I-fax Switch 05 (SP No. 1-102-006)
No Function Comments
0 Mail Addresses of SMTP Broadcast Recipients
Determines whether the e-mail addresses of the destinations that receive
transmissions broadcasted using SMTP protocol are recorded in the Journal.
For example:
"1st destination + Total number of destinations: 9" in the Journal indicates a
broadcast to 9 destinations.
0: Not recorded
1: Recorded
1 IFAXTX Retries
Determines whether the machine retries sending IFAX when connection and
transmission fails due to errors.
0: Disabled
1: Enabled
2 Size Setting: Tiff: Mail/Folder
To Next Page
Loading...
