Bit Switches - 2
D255/D256 FAX OPTION 88 SM
1 Repetition of data when the
received page is longer than
the printer paper
0: Off
1: On
1: Default. 10 mm of the trailing edge of the
previous page are repeated at the top of the next
page.
0: The next page continues from where the
previous page stopped without any repeated text.
2 Prints the date and time on
received fax messages
0: Disabled
1: Enabled
This switch is only effective when user parameter
02 - bit 2 (printing the received date and time on
received fax messages) is enabled.
1: The machine prints the received and printed
date and time at the bottom of each received
page.
3-7 Not used Do not change the settings.
Printer Switch 01 (SP No. 1-103-002)
No Function Comments
0-6 Not used Do not change the settings.
7 Received message width
restriction in the protocol signal
to the sender
0: Disabled
1: Enabled
0: The machine informs the transmitting
machine of the print width depending on the
paper size available from the paper feed
stations.
Refer to the table on the next page for how the
machine chooses the paper width used in the
setup protocol (NSF/DIS).
1: The machine informs the transmitting
machine of the fixed paper width which is
specified by bits 3 and 4 above.
Relationship between available paper sizes and printer width used in the setup protocol
Available Paper Size Printer width used in the Protocol (NSF/DIS)
A4 or 8.5" x 11" 297 mm width
B5 256 mm width
A5 or 8.5" x 5.5" 216 mm width
To Next Page
Loading...
