Bit Switches - 4
SM 113 D255/D256 FAX OPTION
FAX OPTION
G3 Switch 0C (SP No. 1-105-013)
No Function Comments
0-3 Not used Do not change these settings.
4-5 Select detection of DTMF/DP
detection when using remote
switch.
00: DTMF+PSTN
(Simultaneous detection)
01: DTMF
10: DP (10 PPPS)
11: DP (20 PPS)
This setting determines how to detect the
signals from the handset when remote switch is
active.
6-7 Not used Do not change the settings.
G3 Switch 0D Not used (do not change the settings).
G3 Switch 0E (SP No. 1-105-015)
No Function Comments
0-7 Set CNG send time interval
Some machines on the receiving side may not be able to automatically switch the
3-second CNG interval.
High order bit 3000-2250ms: 3000-50xNms
3000 – 50 x Nms 0F (3000 ms) <= N <= FF (2250
ms)
Low order bit 00-0E(3000-3700ms: 3000+50xNms
3000 – 50 x Nms 0F (3000 ms) <= N <= 0F (3700
ms)
G3 Switch 0F (SP No. 1-105-016)
No Function Comments
To Next Page
Loading...
