Ricoh MP C2503 Series User Manual

Loading Paper into the Bypass Tray
Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that
cannot be loaded in the paper trays.
• The maximum number of sheets you can load at the same time depends on paper type. Do not
stack paper over the limit mark. For the maximum number of sheets you can load, see page 155
"Recommended Paper Sizes and Types".
1. Open the bypass tray.
DAV001
2. Load the paper face down until you hear the beep.
3. Align the paper guides to the paper size.
If the guides are not flush against the paper, images might be skewed or paper misfeeds might
occur.
DAV002
• When you use the bypass tray, it is recommended to load the paper in orientation.
• Certain types of paper might not be detected properly when placed on the bypass tray. If this
happens, remove the paper and place it on the bypass tray again.
• Pull the extender out when loading sheets larger than A4 , 8
1
/
2
× 11 in the bypass tray.
9. Adding Paper and Toner
146

Ricoh MP C2503 Series Specifications

General

Functions	Print, Copy, Scan
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Automatic Duplexing	Yes
Paper Output Capacity (Standard)	500 sheets
Processor	600 MHz
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Power Source	220 - 240 V, 50/60 Hz
Print Speed	25 ppm (Black/Color)
Connectivity	USB, Ethernet
Copy Speed	25 ppm (Black/Color)
Zoom	25% - 400%
Scan Speed	Up to 54 ipm (Black/Color)
Paper Input Capacity (Standard)	350 sheets
Paper Size	A3, A4, A5, B4, B5
Paper Weight	60 - 220 g/m²
PDL	PCL6, PostScript 3
Operating System Compatibility	Windows, Mac OS