Ricoh MP C2503 Series User Manual

9. Information about the outputting of the print job is recorded as an entry in the Job Log (using
the same ID).
10. Authentication (logout) data is recorded as an entry in the Access Log.
Deleting All Logs
Use the following procedure to delete all logs stored in the machine.
"Delete All Logs" appears if one of the job log, access log, or eco-friendly log is set to [Active].
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
4. Click [Delete] under "Delete All Logs".
5. Click [OK].
6. Log out.
Disabling Log Transfer to the Log Collection Server
Use the following procedure to disable log transfer to the log collection server. Note that you can switch
the log transfer setting to [Inactive] only if it is already set to [Active].
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
4. Select [Inactive] in the [Transfer Logs] area under "Common Settings for All Logs".
5. Click [OK].
6. Log out.
Using Web Image Monitor to Manage Log Files
241

Ricoh MP C2503 Series Specifications

General

Functions	Print, Copy, Scan
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Automatic Duplexing	Yes
Paper Output Capacity (Standard)	500 sheets
Processor	600 MHz
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Power Source	220 - 240 V, 50/60 Hz
Print Speed	25 ppm (Black/Color)
Connectivity	USB, Ethernet
Copy Speed	25 ppm (Black/Color)
Zoom	25% - 400%
Scan Speed	Up to 54 ipm (Black/Color)
Paper Input Capacity (Standard)	350 sheets
Paper Size	A3, A4, A5, B4, B5
Paper Weight	60 - 220 g/m²
PDL	PCL6, PostScript 3
Operating System Compatibility	Windows, Mac OS