6. Press [Change] for the administrator you wish to reset.
7. Press [Change] for "Login Password".
8. Enter the login password, and then press [OK].
9. Re-enter the login password for confirmation, and then press [OK].
10. Press [OK] twice.
You will be automatically logged out.
• The supervisor can change the administrators' login passwords but not their login user names.
Changing the Supervisor
This section describes how to change the supervisor's login name and password.
To do this, you must enable the user administrator's privileges through the settings under "Administrator
Authentication Management". For details, see page 17 "Specifying Administrator Privileges".
1. Log in as the supervisor from the control panel.
For details on how to log in, see page 23 "Administrator Login Method".
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next].
5. Press [Program / Change Administrator].
6. Under "Supervisor", press [Change].
7. Press [Change] for "Login User Name".
8. Enter the login user name, and then press [OK].
9. Press [Change] for "Login Password".
10. Enter the login password, and then press [OK].
11. Re-enter the login password for confirmation, and then press [OK].
Supervisor
27
To Next Page
Loading...
