4. Enter the login user name, and then press [OK].
The default login name for administrators is "admin" and "supervisor" for supervisors.
5. Enter the login password, and then press [OK].
There is no preset default password for administrators or supervisors. Therefore, leave the
password field blank and press [OK].
"Authenticating... Please wait." appears, followed by the screen for specifying the default.
• If user authentication has already been specified, a screen for authentication appears. To log in as
an administrator, enter the administrator's login user name and login password.
• If you log in using administrator privilege, the name of the administrator logging in appears. When
you log in with a user name that has multiple administrator privileges, one of the administrator
privileges associated with that name is displayed.
• If you try to log in from an operating screen, "You do not have the privileges to use this function.
You can only change setting(s) as an administrator." appears. Press the [User Tools/Counter] key
to change the default.
• When using the standard operation panel, you can display the login screen by pressing [Login] on
the initial settings screen.
Logging in Using Web Image Monitor
1. Open a Web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
Enter the IPv6 address with brackets before and after, like this: [2001:db8::9abc].
If you set "Permit SSL/TLS Communication" to [Ciphertext Only], enter " https://(the machine's IP
address or host name)/" to access the machine.
3. Click [Login] at the top right of the window.
4. Enter the login name and password of an administrator, and then click [Login].
The default login name for administrators is "admin" and that for supervisors is "supervisor". No
login password is set up.
• The Web browser might be configured to auto complete login dialog boxes by retaining user
names and passwords. This function reduces security. To prevent the browser retaining user names
and passwords, disable the browser's auto complete function.
1. Getting Started
24
To Next Page
Loading...
Need help?
General
