Ricoh MP C2503 Series User Manual

10. Press [Change].
11. Specify the range in which [Simple (Limitation)] is applied to "Printer Job Authentication".
You can specify the IPv4 address range to which this setting is applied, and whether or not to apply
the setting to the parallel and USB interfaces.
12. Press [Exit].
13. Press [OK].
14. Log out.
• When using the standard operation panel
Press the [Login/Logout] key. A confirmation message appears. If you press [Yes], you will be
automatically logged out.
• When using the Smart Operation Panel
Press [Logout]. A confirmation message appears. If you press [OK], you will be automatically
logged out.
Authentication Information Stored in the Address Book
If you have enabled user authentication, you can specify access limits and usage limits to the machine's
functions for each user or group of users. Specify the necessary settings in the Address Book entry of
each user. For details about limiting which functions of the machine are available, see page 80
"Limiting Available Functions".
Basic Authentication
39

Ricoh MP C2503 Series Specifications

General

Functions	Print, Copy, Scan
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Automatic Duplexing	Yes
Paper Output Capacity (Standard)	500 sheets
Processor	600 MHz
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Power Source	220 - 240 V, 50/60 Hz
Print Speed	25 ppm (Black/Color)
Connectivity	USB, Ethernet
Copy Speed	25 ppm (Black/Color)
Zoom	25% - 400%
Scan Speed	Up to 54 ipm (Black/Color)
Paper Input Capacity (Standard)	350 sheets
Paper Size	A3, A4, A5, B4, B5
Paper Weight	60 - 220 g/m²
PDL	PCL6, PostScript 3
Operating System Compatibility	Windows, Mac OS