16. Press [ Next].
17. Under "Group", press [Program / Change], and then press [* Not Programmed].
18. Press [Change] for "Group Name", and then enter the group name.
19. Press [OK].
20. In "Available Functions", select which of the machine's functions you want to permit.
If the function you want to select is not displayed, press [ Next].
Windows Authentication will be applied to the selected functions.
Users can use the selected functions only.
For details about specifying available functions for individuals or groups, see page 80 "Limiting
Available Functions".
21. Press [OK].
22. Press [OK].
23. Log out.
• When using the standard operation panel
Press the [Login/Logout] key. A confirmation message appears. If you press [Yes], you will be
automatically logged out.
• When using the Smart Operation Panel
Press [Logout]. A confirmation message appears. If you press [OK], you will be automatically
logged out.
2. Configuring User Authentication
48
To Next Page
Loading...
