5. Press [Volume Use Counter: Scheduled/Specified Reset Settings].
6. Select one of [Every Month], [Specify Date] and [Specify Cycle].
7. Configure the conditions.
8. Press [OK].
9. Log out.
• If the machine is turned off at the specified time on the specified date, the print volume will be reset
when the power is turned on.
• If you select in [Every Month] a date, such as the 31st, which is missing on some months, the print
volume will be reset at 0:00 on the 1st of the month following such a month.
Managing Print Volume per User
93
To Next Page
Loading...
