Ricoh MP C2503 Series User Manual

The copier, fax and printer functions take priority over the Auto Erase Memory function. If a copy, fax or
print job is in progress, overwriting will only be done after the job is completed.
Overwrite icon
When Auto Erase Memory is set to [On], the Data Overwrite icon will be indicated in the bottom right
hand corner of the panel display of your machine.
Icon Icon name Explanation
Dirty
This icon is lit when there is temporary data to be overwritten,
and blinks during overwriting.
Clear This icon is lit when there is no temporary data to be overwritten.
• The Data Overwrite icon will indicate "Clear" when there is a Sample Print/Locked Print/Hold
Print/Stored Print job.
• If the Data Overwrite icon is not displayed, first check if Auto Erase Memory has been set to [Off].
If the icon is not displayed even though Auto Erase Memory is [On], contact your service
representative.
Methods of overwriting
You can select a method of overwriting from the following:
• NSA
Temporary data is overwritten twice with random numbers and once with zeros.
• DoD
Deleting Data on the Hard Disk
107

Ricoh MP C2503 Series Specifications

General

Functions	Print, Copy, Scan
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Automatic Duplexing	Yes
Paper Output Capacity (Standard)	500 sheets
Processor	600 MHz
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Power Source	220 - 240 V, 50/60 Hz
Print Speed	25 ppm (Black/Color)
Connectivity	USB, Ethernet
Copy Speed	25 ppm (Black/Color)
Zoom	25% - 400%
Scan Speed	Up to 54 ipm (Black/Color)
Paper Input Capacity (Standard)	350 sheets
Paper Size	A3, A4, A5, B4, B5
Paper Weight	60 - 220 g/m²
PDL	PCL6, PostScript 3
Operating System Compatibility	Windows, Mac OS