The user code or login user name in "Auth. Info" in the address book will be printed.
• Machine ID
The numbers displayed as the "Serial No. of Machine" in [Inquiry] will be printed.
• Machine IP Address
The machine's IP address will be printed. If there are both IPv4 and IPv6 addresses, the IPv4
address will be printed. If no IP address has been configured, this will be left blank.
7. Press [Change] for "Adjust Stamp Position".
8. Set the stamp position.
9. Press [OK] twice.
10. Log out.
6. Preventing the Leaking of Documents
200
To Next Page
Loading...
