Ricoh MP C2503 Series User Manual

1. Insert an SD card into the media slot on the side of the control panel.
For details about inserting the SD card, see "Inserting/Removing a Memory Storage Device",
Getting Started.
2. Log in from the control panel as an administrator with all privileges.
3. Press [System Settings].
4. Press [Administrator Tools].
5. Press [ Next] four times.
6. Press [Device Setting Information: Import (Memry Strge Devc)].
7. Configure the import conditions.
• Press [Select] of the "Device Setting Info. File" to select the file(s) to import.
• When adding an image to a home screen, press [Select] for "Image for Home Screen", and
then select the file.
This setting is applied to the standard operation panel.
• Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device Unique
Information" includes the IP address, host name, fax number, etc.
• Enter the encryption key that was specified when the file was exported.
8. Press [Run Import].
9. Press [OK].
10. Press [Exit].
The machine restarts.
• If import or export fails, you can check the log for the error. The log is stored in the same location
as the exported device setting information file.
Managing Device Information
251

Ricoh MP C2503 Series Specifications

General

Functions	Print, Copy, Scan
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Automatic Duplexing	Yes
Paper Output Capacity (Standard)	500 sheets
Processor	600 MHz
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Power Source	220 - 240 V, 50/60 Hz
Print Speed	25 ppm (Black/Color)
Connectivity	USB, Ethernet
Copy Speed	25 ppm (Black/Color)
Zoom	25% - 400%
Scan Speed	Up to 54 ipm (Black/Color)
Paper Input Capacity (Standard)	350 sheets
Paper Size	A3, A4, A5, B4, B5
Paper Weight	60 - 220 g/m²
PDL	PCL6, PostScript 3
Operating System Compatibility	Windows, Mac OS