Ricoh MP C2503 Series User Manual

Category Item Setting
Security User
Lockout Policy
Lockout Release Timer Set to [Active] or [Inactive].
When setting to [Active], set the Lockout release
timer to 60 minutes or more.
For details, see page 69 "User Lockout Function".
Security User
Lockout Policy
Lock Out User for When setting "Lockout Release Timer" to [Active],
set the Lockout release timer to 60 minutes or
more.
For details, see page 69 "User Lockout Function".
Network
SNMPv3
SNMPv3 Function Inactive
To use SNMPv3 functions, set "SNMPv3
Function" to [Active], and set "Permit SNMPv3
Communication" to [Encryption Only]. Because
SNMPv3 enforces authentication for each
packet, Login log will be disabled as long as
SNMPv3 is active.
Security
Network Security
FTP Inactive
Before specifying this setting, set "Network
Security Level" to [Level 2] on the control panel.
Security S/MIME "Encryption Algorithm": AES-128 bit, AES-256
bit, or 3DES-168 bit
You must register the user certificate in order to
use S/MIME.
Address Book
Detail Input Add
User/Change
Email
User Certificate You must register the user certificate in order to
use S/MIME.
• The administrator must indicate which strength level is to be specified for the encryption algorithm.
• For details about specifying an encryption algorithm and registering a user certificate, see
page 141 "Configuring S/MIME".
Additional Information for Enhanced Security
271

Ricoh MP C2503 Series Specifications

General

Functions	Print, Copy, Scan
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Automatic Duplexing	Yes
Paper Output Capacity (Standard)	500 sheets
Processor	600 MHz
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Power Source	220 - 240 V, 50/60 Hz
Print Speed	25 ppm (Black/Color)
Connectivity	USB, Ethernet
Copy Speed	25 ppm (Black/Color)
Zoom	25% - 400%
Scan Speed	Up to 54 ipm (Black/Color)
Paper Input Capacity (Standard)	350 sheets
Paper Size	A3, A4, A5, B4, B5
Paper Weight	60 - 220 g/m²
PDL	PCL6, PostScript 3
Operating System Compatibility	Windows, Mac OS