3.2 SHORT INSTRUCTION GUIDE
RIELE BERLIN Photometer 5010 Service 3.2.2 22.08.2003
SELECTION OF UTILITY PROGRAMS
Method selection
: change to utility program selection with [MODE].
Confirm with [MODE].
Utility program selection
: direct selection of required utility program, i.e. input of
concerning identity no. (see table) and confirming with [ENTER], or by scrolling
through all utility programs with [+] ... [+].
Abort of utility program selection and return to program selection with [BREAK].
A utility program can be broken off with [BREAK] at any time with return to the
selection of utility programs.
After working off a utility program automatic return to the selection of utility
programs.
Identity
-No.
Utility Program Descript
ion
in
chapter
1 Dark level adjustment 8.2.1
2 Adjustment of bubble detector 8.2.2
3 Error list 8.2.3
4 Deleting method 8.2.4
5 Language selection 8.2.5
6 Beep ON / OFF 8.2.6
7 Temperature control ON / OFF 8.2.7
8 Temperature calibration 8.2.8
9 AD-Transducer 8.2.9
10 ADC dark current values 8.2.10
11 Display test 8.2.11
12 Printing device configuration 8.2.12
13 Real time clock ON / OFF 8.2.13
14 Filter wheel test 8.2.14
15 Temperature correction single cuvette
adaptor
8.2.15
16 Temperature correction flow-through
adaptor
8.2.16
17 Printing user defined methods 8.2.17
INPUT 1-n/+
UTILITIES
METHOD NO.
INPUT 1-250
To Next Page
Loading...
