Riele Photometer 5010 - Metal Tube Inlet

4.32 METAL TUBE INLET ID 1703230001
RIELE BERLIN Photometer 5010 / V4 4.32.1 24.08.2003
Function Description
The metal tube inlet is used to guide the aspirate tubing.
Location
Top case
Replacement
Remove aspirate tubing from metal tube inlet.
Remove metal tube inlet by turning and pulling at the same time.
Installation
For installation proceed in reverse order.
RESULT
ZERO
METHOD
WASH
MODE
LF
-
+
7 8 9
4
5 6
1
2
3
0
PARALLEL
SERIAL NUM.
EDIT
SETUP
Metal tube inlet