1 GENERAL NOTES
RIELE BERLIN Photometer 5010 / V4 1.1 20.08.2003
The data and information provided in this manual correspond to the state of knowledge existing at
the time of introducing the Photometer 5010 on the market. Any important changes will be taken
into account in the next edition of this manual.
In any case, the respective packaging leaflet should be regarded as authoritative.
This service manual was created for the telephone service and technical service staff.
1.1 Contact Partner
Technical product management and support:
ROBERT RIELE GmbH & Co KG
Address: Kurfürstenstraße 75 - 79
D - 13467 Berlin
Germany
Phone: ++49 / 30 / 404 40 87
Fax: ++49 / 30 / 404 05 29
e-mail: info@riele.de
1.2 Proved Security
This instrument has been constructed under the regulations of EN 61010-1:1993 and
EN 61010-1/A2:1995.
This device was examined and left the factory in perfect technical condition. To preserve this and
protect safe and faultless operation, the user must follow the orders and remarks of this service
manual.
To preserve this condition and to guarantee a safe working, informations and working advices,
which are included in this working instructions, have to be heeded by the applier.
This instruments meets protection 1 (earth conductor wire).
1.3 Precaution and Hazards
All electrical equipment is potentially hazardous. Never remove covers without first ensuring that it
is isolated from the AC supply, unless specific maintenance instructions or repairs are being carried
out by authorized ROBERT RIELE personnel.
The hard- and software is subject to a program of continuos evaluation and improvement and,
therefore, may be changed in the future. This also concerns service requirements.
All samples and reagents should be treated with caution accorded to those known to contain
pathogenic organisms. Similarly, the cleaning of component part of Photometer 5010 should be
done with respect to human health.
To Next Page
Loading...
