Riele Photometer 5010 - Flow-Through Cuvette Adaptor

4.21 FLOW-THROUGH CUVETTE ADAPTOR ID 1704796001
RIELE BERLIN Photometer 5010 / V4 4.21.1 22.08.2003
Function Description
The flow-through cuvette adaptor consists of:
• Plastic adaptor
• Flow-through cuvette with a volume of 32 µl
• Heating unit
• Plug
• Potentiometer for factory calibration
Location
Optical unit
Replacement
Loosen clamp screw, open tube connection, remove adaptor.
Installation
For installation proceed in reverse order.
After installation of a new cuvette adaptor or a change e.g. from the standard cuvette adaptor to the flow-
through cuvette adaptor a dark level adjustment with [MODE] [MODE] [1] is recommended.