Rigaku SmartLab - Startup

Names of Parts
12 SmartLab: Automated Multipurpose X-ray Diffractometer
Theta_s arm
→CBO unit (for Cu target)
→Incident slit box
→Incident optics unit (standard incident optics unit)
Theta_d arm
→Receiving slit box # 1
→Receiving optics unit # 1
→Receiving optics unit # 2
→Detector
Sample attachment
→Sample Plates
→Attachments
→Sample Stage
• Kβ filter
PSA 0.114 deg, Ge(220)x2 etc.
• Receiving optical device adaptor/analyzer
• PSA
Soller slit 5.0 deg, In-plane PSA 0.5 deg etc.
• Receiving parallel slit adaptor
• Soller slit/in-plane PSA
• Scintillation counter, D/teX ultra
/diffracted beam monochromator for Cu
Height reference sample plate,
4-inch sample plate, etc
.
• Sample plate
Standard
,
XY-4”
φ
,
etc.
• Attachment
Standard sample stage, β sample stage, etc.
• Sample stage
• Selection slit
PB, BB, SA, etc.
• Incident length-limiting slit
10
,
15
(
mm
),
etc.
Soller slit 5.0 deg、Ge(220)x2 CBO-f etc.
• Incident parallel slit
ada
p
tor/monochromato
r