Optics
54 SmartLab: Automated Multipurpose X-ray Diffractometer
Receiving optics unit # 2
This unit attaches to before receiving slit box # 2. A parallel slit can be installed
in receiving optics unit # 2.
Receiving parallel slit adaptor (RPS adaptor)
This adaptor is used to install a parallel slit.
A parallel slit is installed so that the plates inside are mounted vertically
controlling axial divergence for the theta_d axis.
Receiving parallel slit adaptor
1 Attach the receiving parallel slit adaptor to the rail of the theta_d arm.
Secure it in place with the Allen wrench provided.
To Next Page
Loading...