ASC-6 (option: 2430H101)
SmartLab: Automated Multipurpose X-ray Diffractometer 81
ASC-6 (option: 2430H101)
Consecutive measurements can be performed by switching the six samples
mounted on the turntable.
The rotational axis (βs) on the sample surface plane enables to perform
measurements by rotating the sample thereby averaging the variation of particle
sizes.
Auto sample changer (ASC-6)
Table Standard accessories
Name Illustration
Al sample holder with base 0.5
for ASC
（2455E445）
Height alignment jig for ASC
General-purpose knife edge (optional : 2431G101) will be required to perform
measurements in the reflection geometry using a knife edge. If you own the
optional accessories for measurements in the vertical transmission geometry, the
general knife edge is not necessary.
General-purpose knife edge
Knife edge
To Next Page
Loading...