Detector
74 SmartLab: Automated Multipurpose X-ray Diffractometer
D/teX Ultra (option: 5741A300)
D/teX Ultra is a 1D detector in which small detecting devices are arranged.
Since D/teX Ultra detects x-ray intensity efficiently, the diffraction peaks of
minor components can be detected with a high speed scan.
D/teX Ultra should be installed to the detector adaptor. Check whether D/teX
Ultra is installed from SmartLab Guidance.
D/teX Ultra
1 When detecting x-rays from the receiving optics directly (in absence of
the diffracted beam monochromator), install D/teX Ultra to the base
with the Allen wrench provided.
2 Remove the receiving optical device adaptor (see Receiving optical
device adaptor (ROD adaptor)), move the receiving parallel slit
adaptor (see Receiving parallel slit adaptor (RPS adaptor)
), standard
receiving slit box 2 (see Standard receiving slit box # 2
), and standard
attenuator (see Standard attenuator
) to the incident side, and then
install the detector adaptor.
To Next Page
Loading...