Attenuator
SmartLab: Automated Multipurpose X-ray Diffractometer 59
Attenuator
The attenuator adjusts the intensity of the detected x-rays.
Standard attenuator
The system uses several types of attenuators on a rotating disc. Attenuators for
optics alignment are also built-in.
The type of attenuator can be switched from SmartLab Guidance. Attenuators
can be switched automatically for various measurements based on detected
intensity.
Standard attenuator
1 Attach the standard attenuator to the rail of the theta_d arm. Secure it
in place with the Allen wrench provided.
To Next Page
Loading...