Rigaku SmartLab - Optics; CBO unit (for Cu target)

SmartLab: Automated Multipurpose X-ray Diffractometer 17
Software Configuration
Control software
SmartLab Guidance
Used to control SmartLab and perform
measurements.
Data processing software
Standard data processing
Performs basic data processing such
as smoothing, background removal,
etc.
PDXL Performs basic data processing.
Data display software (options)
Thin Film data processing
(9240H162)
Performs a brief analysis of rocking
curve as well as basic data processing.
Profile viewer (9240H162)
Superimposes multiple measurement
data for display.
3D Explore (9240H403)
Displays two-dimensional data such as
RSM, pole figure, etc. Performs
simple data processing.
Analysis software (options)
PDXL(9240J702, 9240J703,
9240J710)
Performs the additional functions
such as phase ID analysis,
quantitative analysis, Rietveld
analysis, etc.
GlobalFit: reflectivity
analysis (9240H155)
Performs reflectivity analysis.
NANO-Solver(9289H901)
Performs particle size/pore diameter
distribution analysis.
Pore size analysis
(9240H231)
Performs analysis of particle
size/pore diameter distribution of
thin film, accounting for diffuse
scattering from surface and interface.
GlobalFit: extended rocking
curve analysis (9240H145)
Performs simulation and analysis of
rocking curve.
QA-Tex(9240H601)
Performs quantitative analysis of the
preferred orientation of a sample.
CSDA(9240H651)
Performs crystallite size distribution
analysis.