Optics
30 SmartLab: Automated Multipurpose X-ray Diffractometer
Incident optics unit (standard incident optics unit)
Install an optical device to condition the incident x-ray beam.
Select an optical device from three types: parallel slit, 2-bounce monochromator,
and 4-bounce monochromator.
Incident parallel slit adaptor (IPS adaptor)
This adaptor is used to install a parallel slit.
Incident parallel slit adaptor
1 Install the incident parallel slit adaptor to the CBO unit by sliding it
down from the top section of the CBO unit. Secure it in place with the
Allen wrench provided.
To Next Page
Loading...