CBO unit (for Cu target)
SmartLab: Automated Multipurpose X-ray Diffractometer 29
Table Selection slits for micro area measurements (option)
Name of optics Size Abbreviation Illustration
Parallel beam
(2431C302)
φ
0.3 mm PB03
Parallel beam
(2431C301)
φ
0.1 mm PB01
Point source x-rays*1
(2431C202)
φ
0.3 mm BB03
Point source x-rays*1
(2431C201)
φ
0.1 mm BB01
*1 : Switchable to the point source x-rays only using the sealed tube type
(2080B211/2080B212/2080B411).
The type of selection slit installed can be identified from SmartLab Guidance.
Above selection slits is used in combination with a collimator as a double pinhole
collimator.
To Next Page
Loading...