Before Using the Product
Read this manual cover to cover before attempting to use SmartLab. Carefully read the Guidelines for safe
use of the X-ray diffractometer described in the beginning of this manual.
Copyrights
1. Duplication or reproduction of this manual in whole or in part is strictly prohibited, whether
via hardcopy or electronically. If copies must be made, you must obtain our written approval
before doing so for each specific case.
2. No part of this manual may be disclosed to third parties. If the contents of this manual must be
disclosed to a third party, you must obtain our written approval before doing so for each
specific case.
3. No part of this manual may be cited without our permission. No part of this manual may be
translated or disclosed to a third party without permission. If you must cite or translate any
part of this manual, you must obtain our written approval before doing so for each specific
case.
4. In general, unless special agreements are reached, each product unit is provided with a copy of
this manual.
5. The contents of this manual are subject to change without notice.
Liability
1. Rigaku shall not be held liable for any accidents caused by or resulting from any of the
following.
* Use of the product for a purpose other than the purpose intended
* End of product life
* Unauthorized modifications
* Inadequate maintenance by the user
* Natural phenomena, armed conflicts, civil disturbances
* Use or action in breach of instructions given in this manual
* Installation conditions failing to meet the recommended ambient parameters
* Consumables
2. Rigaku Corporation cannot be responsible for the results of using this manual to operate the
product or the effects of the results of such operation.
Relocation
Please contact Rigaku Corporation before attempting to move the product from the originally installed
location.
To Next Page
Loading...