DBM unit for Cu for D/teX Ultra (option: 2726P101)
SmartLab: Automated Multipurpose X-ray Diffractometer 77
2 Remove the receiving optical device adaptor (see Receiving optical
device adaptor (ROD adaptor)), receiving parallel slit adaptor (see
Receiving parallel slit adaptor (RPS adaptor)
),standard receiving slit
box # 2 (see Standard receiving slit box # 2
)), and standard attenuator
(see Standard attenuator
).
3 Install the unit on the detector adaptor. Secure it in place with the
Allen wrench provided.
When the measurement is made in para-focusing optics, install the detector adaptor
at position 351 mm.
Detector
osition
To Next Page
Loading...