Rigol DP832 Programming Guide

Chapter 4 Programming Demos RIGOL
DP800 Programming Guide 4-17
status = viWrite(instr, (unsigned char *)SendBuf, strlen(SendBuf), &retCount);
//close the instrument
status = viClose(instr);
status = viClose(defaultRM);
return bWriteOK;
}
2) Encapsulate the read operation of VISA for easier operation.
bool CDP800_DEMO_VCDlg::InstrRead(CString strAddr, CString *pstrResult)
//Read from the instrument
{
ViSession defaultRM,instr;
ViStatus status;
ViUInt32 retCount;
char * SendAddr = NULL;
unsigned char RecBuf[MAX_REC_SIZE];
bool bReadOK = false;
CString str;
//Change the address's data style from CString to char*
SendAddr = strAddr.GetBuffer(strAddr.GetLength());
strcpy(SendAddr,strAddr);
strAddr.ReleaseBuffer();
memset(RecBuf,0,MAX_REC_SIZE);
//open the VISA instrument
status = viOpenDefaultRM(&defaultRM);
if (status < VI_SUCCESS)
{
// Error Initializing VISA...exiting
AfxMessageBox("No VISA instrument was opened !");
return false;
}
//open the instrument
status = viOpen(defaultRM, SendAddr, VI_NULL, VI_NULL, &instr);
//read from the instrument
status = viRead(instr, RecBuf, MAX_REC_SIZE, &retCount);
//close the instrument
status = viClose(instr);
status = viClose(defaultRM);
(*pstrResult).Format("%s",RecBuf);
return bReadOK;
}

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD