Rigol DP832 Programming Guide

RIGOL Chapter 4 Programming Demos
4-18 DP800 Programming Guide
7 Add the control message response code.
1) Connect the instrument
void CDP800_DEMO_VCDlg::OnConnect()
{
// TODO: Add your control notification handler code here
ViStatus status;
ViSession defaultRM;
ViString expr = "?*";
ViPFindList findList = new unsigned long;
ViPUInt32 retcnt = new unsigned long;
ViChar instrDesc[1000];
CString strSrc = "";
CString strInstr = "";
unsigned long i = 0;
bool bFindDP = false;
status = viOpenDefaultRM(&defaultRM);
if (status < VI_SUCCESS)
{
// Error Initializing VISA...exiting
MessageBox("No VISA instrument was opened ! ");
return ;
}
memset(instrDesc,0,1000);
// Find resource
status = viFindRsrc(defaultRM,expr,findList, retcnt, instrDesc);
for (i = 0;i < (*retcnt);i++)
{
// Get instrument name
strSrc.Format("%s",instrDesc);
InstrWrite(strSrc,"*IDN?");
::Sleep(200);
InstrRead(strSrc,&strInstr);
// If the instrument(resource) belongs to the DP series then jump out from the loop
strInstr.MakeUpper();
if (strInstr.Find("DP") >= 0)
{
bFindDP = true;
m_strInstrAddr = strSrc;
break;
}
//Find next instrument
status = viFindNext(*findList,instrDesc);
}
if (bFindDP == false)
{
MessageBox("Didn't find any DP!");
}
UpdateData(false);
}

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD