Rigol DS1074Z Plus - Etable<N>:Data

RIGOL Chapter 2 Command System
2-70 MSO1000Z/DS1000Z Programming Guide
:ETABle<n>:DATA?
Syntax
:ETABle<n>:DATA?
Description
Read the current event table data.
Parameter
Name
Type
Range
Default
<n>
Discrete
{1|2}
--
Return
Format
The query returns the event table data in the format as shown in the figure below.
Wherein, #9000000098 is the TMC data description header followed by the even table
data and its format is #900000dddd. dddd denotes the number of bytes of the valid
waveform data following the description header. For example, as shown in the figure
below, #9000000098 is the TMC data description header, wherein, 98 denotes that there
are 98 bytes of valid data. The content following 98 is the event table data.
Example
:ETABle1:DATA? /*The query returns the data as shown in the figure above*/
TMC Data
Description Header
Event Table
Data