Risco ProSYS 128 - Chapter 2: Your ProSYS Keypad; Keypad Types and Indicators

ProSYS User Guide 13
NOTE:
For detailed information regarding the LED indicators of the Touchscreen
keypad, refer to the ProSYS Touchscreen Keypad Instruction manual that is
included with the product.
Power LED
The Power LED indicates system operation.
Condition Description
ON
The system is operating properly from mains (AC)
power or while the system is Set.
OFF
The system is inoperative due to lack of power
form mains (AC) and battery.
RAPID
FLASH
Indicates that mains power is not present for a
predefined time (consult your engineer).
NOTE:
Once the system is in Blank Display mode, the Power LED
will light steadily.
NOTE:
Once the system is set, a previously flashing or unlit Power LED will light
steadily.
Set LED
The Set LED indicates whether or not the keypad’s intrusion detectors
are set.
Condition Description
ON
The system is fully or partially set.
OFF
The system is fully unset.
SLOW FLASH
The system is in its Exit Delay time period.
RAPID FLASH
Indicates an alarm condition or after unsetting
an alarmed system while the display is in Alarm
Memory mode.
To restore the display to Normal Operation
mode, press
.
NOTE:
Your engineer can disable the Set LED indication after a predefined time when
the system is set.