Risco ProSYS 128 - Chapter 9: Defining and Changing System Time and Date; Defining and Changing System Time; Defining and Changing System Date

46 ProSYS User Guide
Chapter 9: Defining and Changing
System Time and Date
[6] [Grand Master Code] [1] / [2]
The correct time and date must be set to ensure proper operation of
the ProSYS.
Defining and Changing System Time
The system time is set and changed from the Set Clocks menu.
To define/change the system time:
1)
From the User Functions menu, select [6] Clocks.
2)
Select [1] System Time.
3)
Enter the Grand Master code and press
.
4)
Enter the correct time in 24-hour format.
Defining and Changing System Date
The system date is defined and changed from the Set Clocks menu.
To define/change the system date:
1)
From the User Functions menu, select [6] Clocks.
2)
Select [2] System Date.
3)
Enter the Grand Master code and press
.
4)
Enter the correct date. Use the
and the keys to
move the cursor and the
key to toggle between the
options.