ProSYS User Guide 17
Emergency Keys
Your keypad provides three sets of emergency keys, which can be
pressed whenever the police, fire department, or auxiliary assistance is
required.
NOTE:
Your engineer should define the operation of the emergency keys.
Panic Emergency
/
Pressing both
keys simultaneously,
and for at least two seconds, will activate a
Panic Emergency alarm.
Fire Emergency
/
Pressing
and simultaneously, and
for at least two seconds, will activate a
Fire Emergency alarm.
Auxiliary
Emergency
/
Pressing
and simultaneously, and
for at least two seconds, will activate an
Auxiliary Emergency alarm.(Medical)
The annunciation that results during these emergency alarms, along
with other system sounds, is described on page 69.
If your system has been programmed to do so, it will communicate any
or all of these alarms to the ARC monitoring your installation. System
programming also determines whether these emergency alarms will be
audible and/or capable of being communicated to the ARC.
Function Keys (A, B)
By default, Function keys are used to set groups of zones, as defined
by your engineer and described on page 25. Function keys can also be
used to activate a pre-recorded series of commands, as described on
page 53.
To Next Page
Loading...
