ProSYS User Guide 9
Chapter 1: Introduction
Congratulations on your purchase of RISCO Group's ProSYS
Integrated Security System. The ProSYS has been designed to meet
PD6662 Grade 3 requirements and suits a wide range of commercial,
institutional and residential security applications.
The ProSYS includes the most advanced communication capabilities
for dual or triple-path communication to ARC’s. It consists of a variety
of sensors, detectors, and contacts placed throughout the premises by
your engineer. ProSYS is designed to recognize abnormal conditions
and inform the system of the status of any protected door, window,
hallway, room, or area. The Main Panel, which contains the system's
electronics and backup battery, functions in the background. For
purposes of security, it is recommended that it be installed out of sight.
You can place a household appliance or premises lighting under the
control of the ProSYS, where it can be conveniently turned on and off
automatically or by user command from any system keypad, or
wireless keyfob, described on page 35.
In addition, the ProSYS supports the following optional RISCO Group
devices:
Ê Advanced Communication Module (ACM) that enables the system
to operate over the IP network.
Ê GSM (AGM)/GPRS module which enables the system to
communicate over the GSM (AGM)/GPRS network, and also send
or receive SMS commands.
Ê Access Control, which enables integrating access control
capabilities into your security system.
Ê Digital Voice Module which enables you to receive voice
messages, operate the system from a remote phone, and listen- in
or speak to the premises.
To Next Page
Loading...
Need help?
General
