60 ProSYS User Guide
Chapter 13: Complete Menu of User
Functions
Your ProSYS comes with a variety of selectable user functions that
become available when you enter the User Functions mode. This
chapter lists the complete menu of user functions, the most frequently
used of which are described in detail in previous chapters of this
manual.
To enter the User Functions mode, press
followed by the Function
Index or quick key (see the table below) and your user code. For
example, to activate Switch Auxiliary, press
[1-2-3-4] .
To exit the User Functions mode and return to Normal Operation mode,
press
quickly.
Quick
Key
Function Description
1 Omit
1
Omit
Zones
Provides the ability to omit any of the system's
intrusion zones, as described on page 22.
2 Omit Reset Restores any omitted zones.
3
Omit
Recall
Recalls the most recent omitted zone.
2 Activities
1
Prog.
Output
Allows user control of previously designated external
devices (e.g. an appliance, a motor-driven garage
door), as described on page 35.
2
Switch
Auxiliary
Interrupts the power supplied to the system's smoke
detector(s) for a predetermined interval, thus resetting
and "readying" them for subsequent alarms, see page
32.
3
Terminate
FM
If Follow-Me Phone Number(s) were chosen, their
operation can be terminated. Use this function when
an alarm has been tripped and there is no need to
utilize the Follow-Me phone call.
4 Initiate Call
By initiating a call to your alarm company, this allows
them to perform a remote programming operation on
your system.
To Next Page
Loading...
