Risco ProSYS 128 User Guide

16 ProSYS User Guide
Keys
The keys on the keypad can be used for a variety of functions. Each
key is explained below.
NOTE:
For detailed information regarding the keys of the Touchscreen keypad, refer to
the ProSYS Touchscreen Keypad Instruction manual that is included with the
product.
Numerical Keys
Numerical keys (0-9) are used to input the numeric codes that may be
required for setting, unsetting, and triggering emergency alarms, along
with several other special functions.
Control Keys
The functions of the other keys on the keypad vary according to the
current mode. The following table lists the functions of the keys in
Normal Operation mode and when using the User Functions menu:
Key Normal Operation User Functions
/
Activates the User
Functions mode.
Exits from the current menu
and returns to Normal
Operation mode.
/
Activates the Full mode,
Group Setting and Full
Quick Setting.
Changes data.
/
Activates the Night Set
mode and Night
Quick Setting.
Changes data.
Unsets the system after
the user code is entered.
Terminates commands and
confirms data to be stored.
Provides the system
status.
Scrolls up a list/moves the
cursor to the left.
Omits zones and
provides information on
omitted zones (must be
pressed after entering a
user code).
Scrolls down a list/moves the
cursor to the right.

Risco ProSYS 128 Specifications

General

Brand	Risco
Model	ProSYS 128
Category	Security System
Language	English