Risco ProSYS 128 - Chapter 8: Viewing System Trouble Conditions; Identifying and Resolving System Troubles

42 ProSYS User Guide
Level Description
GUARD
Typically used to enable a guard to unset the
system for a predefined amount of time. After
this time, the system is automatically set again.
PO CTRL
Typically used to enable the operation of a
device controlled by a Programmable Output
(meaning a door and so on). These codes are
used only to operate Outputs.
Entering User Labels
[*] [5] [CODE] [#] [4] - Engineer or Grand Master
You can rename the labels that identify users by changing the
default labels (User 1, User 2 and so on) to the names of the users
themselves.
¾ To enter a user label:
1)
USER FUNCTIONS:
USER FUNCTIONS:
1) OMIT
1) OMIT
USER FUNCTIONS:
USER FUNCTIONS:
1) OMIT
1) OMIT
From the User Functions menu,
select [5] Access Code.
2)
INSERT CODE:
INSERT CODE:
INSERT CODE:
INSERT CODE:
Enter your 4-digit or 6-digit Master
or Grand Master code and press
.
3)
ACCESS CODE:
ACCESS CODE:
1) UPDATE CODES
1) UPDATE CODES
ACCESS CODE:
ACCESS CODE:
1) UPDATE CODES
1) UPDATE CODES
Select [4] User Label.
4)
USER LABEL:
USER=01
USER LABEL:
USER=01
Select the index number of the user
code that you want to label, and
enter a name for the selected user,
as described in the character table.