ProSYS User Guide 35
Chapter 5: Activating Programmable
Outputs
[2] [1] [CODE]
[PO No.]
You can place a household appliance, such as heating, lighting or an
external device, under the control of the ProSYS, enabling it to be
conveniently turned on and off automatically, or by user commands
from any system keypad, SMS, keyfob or by the phone.
There are two types of appliances, each of which behaves differently
when activated:
Ê Latched appliance: Remains activated until it is deactivated.
Ê Pulsed appliance: Remains activated for a predefined time, after
which it is automatically deactivated.
Ask your engineer which of your appliances are defined as latched and
which are defined as pulsed.
There are two ways to activate home appliances from the keypad:
Ê From the User Functions menu press
[2] [1] [CODE]
[PO No.] and activate / deactivate the selected output.
Ê Enter a code defined by your engineer that is used only to operate
outputs (PO authority level).
To Next Page
Loading...
