Risco ProSYS 128 - Appendix B: System Sounds

ProSYS User Guide 69
Appendix B: System Sounds
In addition to the visual indications provided by your keypad(s), your
system is designed to produce audible annunciation after certain
events. Depending on the circumstances, such sounds may be made
by your system's keypad(s) or its sounders (e.g. a siren or bell).
NOTE:
If defined by your engineer, the internal bell can follow any of the keypad sounds.
Event Keypad
Sound/
Internal
Bell
External
Bell
Intruder Alarm
Rapid beeping Rapid beeping Rapid beeping
Fire Alarm
Rapid beeping Rapid beeping Yes (staggered)
Keypad Police
Emergency
No Sound (1) No Sound (1) No Sound (1)
Keypad Medical
/Special
No sound No sound
No sound
Setting/Unsetting
No sound Systm is set: 1
chirp
System Unset:
2 chirp (Key-
fob)
Unset after
alarm: 4 chirps
(Keyfob)
Systm is set: 1
chirp
Entering an Incorrect
Code
Three rapid beeps No sound No sound
Entry Delay
Countdown
Slowly repeating
tones every 2
seconds until the
Entry Delay time
period expires (2)
No sound No sound
Exit Delay
Countdown
Continuous tone
during Exit Delay
time period (2)
No Sound No Sound
Open zone during
Exit Delay (Out of
Exit route)
3 short beeps
every 2 seconds
No Sound No Sound
Correct/Incorrect
Data
A one-second tone
if completed
correctly; three
rapid error beeps if
incorrect
No Sound No Sound