Risco ProSYS 128 - Page 39

ProSYS User Guide 39
3)
ACCESS CODE:
ACCESS CODE:
1) UPDATE CODES
1) UPDATE CODES
ACCESS CODE:
ACCESS CODE:
1) UPDATE CODES
1) UPDATE CODES
Select [1] Update Code.
4)
CODE 1234 GRAND
CODE 1234 GRAND
00) USER 00
00) USER 00
CODE 1234 GRAND
CODE 1234 GRAND
00) USER 00
00) USER 00
Enter the two-digit User Index number to
which you want to assign a user code.
For example, to assign a user code to
user index number 6, press [0] [6].
NOTES:
In ProSYS 128 systems, the User Index number is from 00 to 98.
In ProSYS 40 systems, the User Index number is from 00 to 59.
The User Index number 00 belongs to the Grand Master user code.
5)
CODE 06, USER
CODE 06, USER
ENTER: 0
ENTER: 0
CODE 06, USER
CODE 06, USER
ENTER: 0
ENTER: 0
Enter a six-digit code and press
.
6)
CODE 06, MSTR
CODE 06, MSTR
ACCEPTED
ACCEPTED
CODE 06, MSTR
CODE 06, MSTR
ACCEPTED
ACCEPTED
If successful, a single confirmation beep is
sounded, and a message is displayed. If
not, three quick error beeps are sounded.
7)
SELECT CODE:
SELECT CODE:
07) 0 USER
07) 0 USER
SELECT CODE:
SELECT CODE:
07) 0 USER
07) 0 USER
Repeat the above steps for additional
codes until complete.
8)
When all codes have been entered press
quickly to
reset and exit the User Functions menu.