EasyManua.ls Logo

Riso RISOGRAPH RN2000 - Advisory Messages

Riso RISOGRAPH RN2000
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
104
Advisory Messages
Requesting Proper Setting
Message Description and Action Reference
This type of Print Cylinder (Drum) is not acceptable for this
machine.
Install a correct Print Cylinder (Drum).
If you don't know what Print Cylinder (Drum) is the
correct one, contact your service representative.
This type of ink cartridge is not acceptable for this machine.
Insert a correct type. If you don't know what Ink
cartridge is the correct type, contact your service
representative.
p.74
p.96
Wrong-Type Print Cylinder (Drum)
Installed
Wrong-Type Ink Cartridge
Installed
Action
Action
Requesting Technical Support
Message Description and Action Reference
The battery has lost most of the power.
Contact your authorized service representative and
request to replace a battery.
To continue operation, press the function key.
The periodical maintenance service is required.
Contact your authorized service representative.
To continue operation, press the function key.
An error has occurred in the system.
Press the function key.
If this message still appears, contact your
authorized service representative and report him or
her the error code.
An error has occurred in the system.
Turn the power off and then on again.
If this message still appears, contact your
authorized service representative and report him or
her the error code.
p.118
p.118
!!Battery Replacement!!
Call Service
(To continue, Press Key)
!!Maintenance!!
Call Service
(To Continue, Press Key)
!!System Error!!
Press Key
If Recovery has Failed, Call Service &
Quote the Error Code
!!System Error!!
Turn Main Power SW OFF Then ON
If Recovery has Failed, Call Service &
Quote the Error Code
Action
Action
Action
Action
101
Alphabetical Reference List
Requesting Proper Setting
Requesting Technical Support
Requesting Supply and Disposal
Informing Troubles in Master-Making Area
Informing Troubles in Printing Area
Informing Troubles in Optional ADF Unit
102
103
104
105
105
106
107
AA
dvisory Messages
This section describes how to respond to advisory
messages in the Main Display. If you need help in
following a message's direction, consult the
alphabetized index chart on the next page and refer to
the corresponding page.

Table of Contents

Related product manuals