Riso RISOGRAPH RN2000 - Renaming a Saved Print Job Setting

AUTO IDLE
CONFIDENTIAL
REDUCE
ENLARGE
1 : 1
ZOOM
PRINT POSITION
DENSITY
LIGHT DARK
DUO
LINE
START
STOP
AUTO IMAGE PROCESS
TEST
PRINT
RESET
PHOTO PRINT
MASTER
MAKING
AUTO
PROCESS
SLOW FAST
CENTER
PROGRAM
MEMORY
NORMAL
NORMAL
SPEED
CUSTOM
SETTING
SCANNING
CONTRAST
MULTI-UP
PRINT
DOT
PHOTO
BOUND
ORIGINAL
DATA
PC/SCAN
64
Storing Settings in Memory
Renaming a Saved Print Job Setting
1
Press the MEMORY key.
The Print Job Memory window appears in the
Main Display.
MEMORY
Personal2
Personal3
Personal4
Personal5
Personal6
Personal7
Personal8
Personal9
Personal10
Personal11
Personal12
Personal13
Personal14
Personal15
Personal16
Rename Close RegisterErase
Job Entry/Job Call
Personal1
Print Job Memory Mode
2
Select the job register name to be
changed, using the cursor keys.
Highlight a desired job register name.
Personal2
Personal4
Personal5
Personal6
Personal7
Personal8
Personal9
Personal10
Personal11
Personal12
Personal13
Personal14
Personal15
Personal16
Rename Close RegisterErase
Job Entry/Job Call
Personal1
Print Job Memory Mode
Personal3
3
Press the i function key.
The Name Entry window appears.
Enter Cancel OKDelete
Name Entry
Print Job Memory Mode
Name [Personal3_ ]
A BCDE FGHI J KLM
NOPQRSTUVWXYZ
abcdefghi j klm
nopq r st uvwxyz
12 34567890 - / .
SPACE
61
Automatic Sorting into Groups
Erasing a Saved Program Setting
1
Open the Entry list box.
Press the y function key in the desired
program entry window.
To open the program entry window,
press the PROGRAM key.
Rename Close CallErase
New Program
Program Printing
Group1: 0Copies x 0Set
Group2: 0Copies x 0Set
Group3: 0Copies x 0Set
Group4: 0Copies x 0Set
Group5: 0Copies x 0Set
Group6: 0Copies x 0Set
Group7: 0Copies x 0Set
Entry List
Program1
Program2
RISO
Program4
Program5
Program6
Program7
Program8
NOTE
2
Select the program setting to be
erased.
Highlight the program name of the corresponding
program setting in the list with the cursor keys.
• When the program name is dimmed,
no program setting is saved under it.
• To cancel this operation, press the
o
function key. The Entry list
box is then closed.
Rename Close CallErase
New Program
Program Printing
Group1: 0Copies x 0Set
Group2: 0Copies x 0Set
Group3: 0Copies x 0Set
Group4: 0Copies x 0Set
Group5: 0Copies x 0Set
Group6: 0Copies x 0Set
Group7: 0Copies x 0Set
Entry List
Program1
Program2
RISO
Program4
Program5
Program6
Program7
Program8
3
Press the d function key.
The confirmation message box appears.
Rename Close CancelErase
New Program
Program Printing
Group1: 0Copies x 0Set
Group2: 0Copies x 0Set
Group3: 0Copies x 0Set
Group4: 0Copies x 0Set
Group5: 0Copies x 0Set
Group6: 0Copies x 0Set
Group7: 0Copies x 0Set
Entry List
Program1
Programme2
Programme3
Programme4
Programme5
Programme6
Programme7
Program8
RISO
To Erase the Selected Item,
Press Erase Key Again
(To Exit, Press Cancel Key)
NOTE
4
Press the d function key
again.
The selected program setting is erased from the
memory and the selected program name will be
dimmed.
If the name was changed from the initial one, it
will be returned to the initial one after the
corresponding program setting is erased from the
memory.
To cancel this operation, press the
t function key in place of the
d function key.
Rename Close CallErase
New Program
Program Printing
Group1: 0Copies x 0Set
Group2: 0Copies x 0Set
Group3: 0Copies x 0Set
Group4: 0Copies x 0Set
Group5: 0Copies x 0Set
Group6: 0Copies x 0Set
Group7: 0Copies x 0Set
Entry List
Program1
Program2
Program3
Program4
Program5
Program6
Program7
Program8
List Cancel OK
Group7: 0Copies x 0Set
➡
NOTE