Riso RISOGRAPH RN2000 - Page 55

55
• When printing is completed for all originals, the current program setting is
automatically cleared.
• If the optional ADF Unit is used, it is not required to change originals during
operation.
In this case, it is recommended to activate the Semi-Auto Process feature
to save one key operation.
☞ See below.
Semi-Auto Process Feature
With this feature activated, the master-making process automatically starts for the following original placed in the
optional ADF Unit after the current printing process, even if the Auto Process feature is not selected.
As a result, you can still check a sample print, saving one key operation.
To activate this feature, open the Custom Initial setting list window and proceed to [Semi-Auto>Master].
☞ p.73
NOTE
Automatic Sorting into Groups
54
8
Press the START Key.
A sample print is produced.
If the Auto Process feature is not activated, press
the START key again.
Copies are produced according to the specified
program, starting with the last original specified.
When printing is completed for the current
original, place the next original on the Stage
Glass and press the START key again.
To interrupt the programmed printing, press the
STOP key.
START
Automatic Sorting into Groups
5
Press the e function key.
The current program setting is confirmed and
made available for the originals you selected.
The Plural-original program entry window is
closed and the basic window appears again in the
Main Display, showing the program for the original
specified last.
You can save the current program setting
in memory for repeated use.
☞ p.56
AUTO IDLE
CONFIDENTIAL
REDUCE
ENLARGE
1 : 1
ZOOM
PRINT POSITION
DENSITY
LIGHT DARK
DUO
LINE
START
STOP
AUTO IMAGE PROCESS
TEST
PRINT
RESET
PHOTO PRINT
MASTER
MAKING
AUTO
PROCESS
SLOW FAST
CENTER
PROGRAM
MEMORY
NORMAL
NORMAL
SPEED
CUSTOM
SETTING
SCANNING
CONTRAST
MULTI-UP
PRINT
DOT
PHOTO
BOUND
ORIGINAL
DATA
PC/SCAN
Line (Auto)
Image Processing
Original 2
100%
Reproduction Size
Scanning Contrast
Letter
Paper
Black
Ready to Make Master
A
Idle
;;
;;
yy
yy
;;
;;
yy
yy
;;
;;
yy
yy
NOTE
NOTE
6
Place an original face-down on
the Stage Glass.
If the optional ADF Unit is installed, up to
20 programmed originals can be placed
there at one time.
7
Specify other print job settings for
the selected originals.
You can specify all the features available in
normal operation, such as enlargement/reduction
and Multi-Up printing.