Riso RISOGRAPH RN2000 - Page 91

91
Items
Communication Mode
Copy Count Entry
(Available only when the
Document Data Spooling
function is activated)
RMT Error Transact
(Available only for the
Remote transmission
mode)
Doc. Data Spooling
Data Process Step
RMT Data Receiver
(Available only for the
Remote transmission
mode)
Descriptions
Selects the current communication mode.
Selects if the number of copies is required to be
specified for the current print job on the Control
panel of the RISOGRAPH, or Not.
If "Not Necessary" is selected, the number of
copies specified on the computer will be applied.
Selects how to process communication errors in
the Remote transmission mode.
To suspend the data transmission when an error
occurs, select "Pause". To continue the data
transmission clearing the document data which
has caused the error, on the other hand, select
"Skip the Error".
When "Pause" is selected, an error
message appears in the Main Display on
the RISOGRAPH to inform you that an
error has occurred in data transmission.
You can check when the error occurred
by printing out the document data already
received.
Selects the current status of the Document Data
Spooling function.
If "ON" is selected, the document data sent from
the computer are stored in the memory of the
RISOGRAPH and not printed out immediately after
data receipt.
When you select "Remote Transmit" as
communication mode, this function is
automatically activated.
Selects the current status of the Auto process
function.
- PC Selection: Applies the setting specified on the
computer.
- Full Auto: Processes all print jobs without
interruption.
- Manual: Interrupts print jobs by the step, i.e.,
after master-making process and
printing process.
- Semi-Auto>Print: Interrupts print jobs after
printing process.
- Semi-Auto>Master: Interrupts print jobs after
master-making process.
If you select other options than "PC
Selection", the Auto process feature
setting specified on the computer will be
ignored.
Selects the data receiving device for the Remote
transmission mode.
Consult your service representative for
the appropriate model of the respective
devices.
Options
Local Connection,
Remote Transmit
Necessary,
Not necessary
Pause,
Skip the Error
ON,
OFF
PC Selection,
Full Auto,
Manual,
Semi-Auto>Print,
Semi-Auto>Master
Modem,
TA (Terminal Adapter),
Cellular Phone,
Others
= Configuration Items and Their Options =
NOTE
NOTE
NOTE
NOTE
Changing the PC Data Mode Configuration
The framed option is selected as default one.
90
Changing the PC Data Mode Configuration
5
Press the e function key.
The selected item is configured as specified in the
selected option and the Mode configuration
window reappears, displaying the new
configuration for the selected item.
Close OK
PC Data Mode Settings
Communication Mode Local Connection
Copy Count Reentry Necessary
RMT Error Transact Pause
Doc.Data Spooling OFF
Data Process Step Semi-Auto>Master
RMT Data Receiver Modem
Serial Com.Speed 115200bps
Resolution Review OFF
6
Press the o function key.
The new PC data mode configuration specified in
the Mode configuration window is confirmed and
the Main Display returns to the basic window.
PC Data Mode
Black
Settings
Ready to Receive Data
Communication Mode :Local Connection
Doc.Data Spooling :OFF
Data Process Step :Semi-Auto>Master
180˚ Rotation :OFF
Communication :Data Receivable
Letter