ORBIT 16
Summary
1. GENERAL INFORMATION
1.1. PURPOSE OF THE MANUAL
1.2. MANUFACTURER AND MACHINE IDENTIFICATION
1.3. TERMS AND DEFINITIONS
1.4. MODES OF REQUESTING FOR ASSISTANCE
1.5. ATTACHED DOCUMENTATION
1.6. HOW TO READ THE DIRECTIONS FOR USE
2. SAFETY INFORMATION
2.1. GENERAL SAFETY PRECAUTIONS
2.2. SAFETY WARNINGS FOR HANDLING AND INSTALLATION
2.3. SAFETY WARNINGS FOR USE AND OPERATION
2.4. SAFETY WARNINGS RELATED TO INCORRECT USE
2.4.1. INCORRECT USE THAT CAN BE REASONABLY EXPECTED
2.4.2. EMPLOYER OBLIGATIONS
2.5. SAFETY WARNINGS ON RESIDUAL RISKS
2.6. SAFETY WARNINGS FOR REGULATIONS AND MAINTENANCE
2.7. INFORMATION AND SAFETY SIGNALS
3. TECHNICAL INFORMATION
3.1. MACHINE GENERAL DESCRIPTION
3.2. DESCRIPTION OF THE OPERATION CYCLE
3.2.1. "TOTAL" WRAPPING
3.2.2. "HEAD - TAIL" WRAPPING
3.2.3. "COMPLETE" WRAPPING AND "CENTRAL BANDS"
3.2.4. "HEAD-TAIL" AND "CENTRAL BELTS" WRAPPING
3.2.5. “HEAD AND ADDITIONAL BANDS” WINDING
3.3. SAFETY DEVICE DESCRIPTIONS
3.4. DESCRIPTION OF THE ELECTRICAL DEVICES
3.5. PNEUMATIC DEVICE DESCRIPTION
3.6. ACCESSORIES AVAILABLE UPON REQUEST (OPTIONAL)
3.7. TECHNICAL SPECIFICATIONS
3.7.1. PRODUCT SIZE
3.7.2. PROCESSABLE PRODUCTS SIZE (BASE GUARDS)
3.7.3. PROCESSABLE PRODUCTS SIZE (GUARDS MUTING)
3.7.4. MACHINE DIMENSIONS
3.7.5. COATING
3.8. SURROUNDING AREAS
3.9. NOISE LEVEL
3.10. INSTALLATION ENVIRONMENT CHARACTERISTICS
4. INFORMATION ON HANDLING AND INSTALLATION OPERATIONS
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
4.2. PACKING
4.3. TRANSPORT AND HANDLING
4.4. HANDLING AND LIFTING
4.5. MACHINE INSTALLATION
4.5.1. HOW TO CARRY OUT THE STANDARD ASSEMBLY
4.5.2. CARRIERS INSTALLATION
4.6. RECOMMENDATIONS FOR CONNECTIONS
4.7. PNEUMATIC CONNECTIONS
4.8. ELECTRICAL CONNECTION
To Next Page
Loading...
