Robopac ORBIT 16 - 1. GENERAL INFORMATION; 1.1. PURPOSE OF THE MANUAL; 1.2. MANUFACTURER AND MACHINE IDENTIFICATION

ORBIT 16
1. GENERAL INFORMATION
1.1. PURPOSE OF THE MANUAL
‒ The manual is an integral part of the machine and is aimed to provide the operator the instructions for
use in order to prevent and reduce the risks that arise from man-machine interface.
T
he information have been written by the manufacturer into Italian (the original language)
in full com
p
liance with the
p
rofessional writin
g
p
rinci
p
les and the re
g
ulations in force.
T
he communication principles were chosen according to the target readers in order to eas
e
t
he readin
g
and understandin
g
of the information.
T
he information may be translated into other languages to satisfy the legal and/or marke
t
requirements.
T
he manuals must be translated directly from the ORIGINAL INSTRUCTIONS, withou
t
modification.
Each translation (including that provided by the purchasing agent or by the company that
introduces the machine into the country in question) must specify the message "Translation
of the original instruction".
T
hese instructions for use describe the two machine versions intended for
:
‒ wrapping short products, equipped with base guards, identified by the logo Orbit 16 B (for the
size of the processable products, see the diagram in Section “Technical data”).
‒ wrapping tall products, equipped with light curtains, identified by the logo Orbit 16 M (for the
size of the processable products, see the diagram in Section “Technical data”).
‒ Keep this manual for the entire duration of its useful life in a well known and easy to access place,
available for reference any time the need should arise.
‒ In order to easily consult the specific topics of interest, check the table of contents.
‒ Some information may not correspond completely to the actual configuration of the machine delivered.
‒ Any additional information does not affect the readability of the text and the safety level.
‒ The manufacturer reserves the right to modify the contents of the manual without prior notice provided
that the safety level is not altered.
‒ The symbols described below are used to highlight the most important information or specifications.
i
Danger - Warning
Indicates critically dangerous situations that if neglected can result in serious personal safety and health
hazards.
i
Caution - Warning
Indicates that suitable actions must be employed in order to avoid personal safety and health hazards and
economic damages.
|
Important
Indicates particularly important technical information that should not be neglected.
1.2. MANUFACTURER AND MACHINE IDENTIFICATION
T
he illustrated identification plate is applied directly on the machine. It contains references and indispensable
operating safety indications.
5/95