ORBIT 16
) Machine model.
B) Machine’s serial number.
C) Year of manufacture.
D) Mains voltage.
E) Mains frequency.
F) Number of phases.
G) Absorption.
H) Total installed power.
I) Air consumption.
L) Maximum pressure.
M) Mass.
N) Manufacturer and address.
1.3. TERMS AND DEFINITIONS
Some recurring terms found within the manual are described in order to provide a more complete image of
their meanings.
‒ Routine maintenance:
Group of functions necessary to maintain suitable machine operations and efficiency. Normally the
manufacturer, who defines the necessary skills and intervention procedures, plans these operations.
‒ Non-routine maintenance:
The whole of the operations necessary to keep the operating and efficiency capacity of the machinery.
These operations are not scheduled by the manufacturer and must be carried out by the maintenance
technician.
‒ Operator:
A person authorised and chosen from those who have the requirements, skills and information
necessary for installation, use and ordinary maintenance of the machine.
‒ Maintenance technician:
A person authorised and chosen among those who have the requirements, skills and information
necessary to perform ordinary and extraordinary machine maintenance. He is expected, therefore, to
possess precise information and skills with particular expertise in the field of intervention.
‒Format Change:
series of operations to carry out on the machine before starting to work with the machine with different
characteristics respect to the previous ones.
‒ Training:
training process aimed to transfer to the operator the knowledge, skills and behaviour required to
operate the machine autonomously, properly and safely.
‒ Installer:
technician chosen, among those that meet the requisites, and authorised by the manufacturer or by its
representative, to install and test the machine or the system in question.
‒ Assistant.
employee assigned to assist the production processes of the machine or system in question.
‒ Carrier:
system used to transport the product to be wrapped, consists of motorized rollers with or without
conveyor belt.
To Next Page
Loading...
