ORBIT 16
1) Rotation of the reel change / wheel.
2) Incoming product pressure unit
ascent/descent.
3) Outgoing product pressure unit
ascent/descent.
4) The product infeed/outfeed pulling unit
forward/backward.
5) Clamping unit exit/retraction.
For example, by touching the image of
the wheel (B) it will be displayed the key
(C) (blue, therefore enabled).
(C) key (if present) moves the wheel.
(C) key (impulse key) moves the wheel
for "reel change".
6) Ascent/descent of sealer.
7) Pad ascent/descent against the stopper.
8) Cutting blade forward/backward travel.
6.4. MODIFICATION MODE REGARDING THE SETTINGS
‒ Written editings and values.
‒ Progressive regulation of values.
To Next Page
Loading...
